Ive used a long metal pick with a 90* bend at the end and some long needle nose pliers to yank out stuck inserts. You could also try some long and flat tweezers too...
From the south to yo mouth!!
Ty but ermm, they are stuck right down like i cant get to them with anything =S
one more tip - if u use pliers, catch the stripe under 'eyelet'..
cheers
hmm i have tried tweezers and they just dont reach =[
Dont know what u mean by a metal pick?
Ahh they should have made the stripes less prone to break or something :@
try a straightened paperclip but wrap it in celotape so the sticky bit is on the outside !!
It's not the size of the feet!!it's the amount of quality on em
A pick is like a small screw driver that comes to a point at the end. The ones I got have different angle bends at the pointy end. Id take a pic but i was on my way out the door!
From the south to yo mouth!!
From the south to yo mouth!!
dyson
Wishing it was like the old days again
They really suck that hard?
=]
use a screwdriver, or use a stanley and just cut below wjhere its stuck then feed it through.
Oh what a feelin! When you're dunking, on the ceilin!
i used just a straighted paperchip with a very small hook on the bottom,it worked but took a lot of time and patience.
good luck
ziggy
![[Image: m_kombinerki-dynagrip-160.jpg]](http://www.narzedziak.pl/photo/m_kombinerki-dynagrip-160.jpg)
