STRIPES STUCK -
Phikz - 24-04-08
Well I have some broken up green stripes stuck at the bottom of one of the stripes in my BK5's
Its doing my head in and i dont know what to do, I cut open the insides of some extremely nackered adicolors before to push them out, i don't really feel like doing that though to these =[
Any tips?
Please
RE: STRIPES STUCK -
sin`pl - 24-04-08
i'm sure it was already asked here.. ^^
![[Image: m_kombinerki-dynagrip-160.jpg]](http://www.narzedziak.pl/photo/m_kombinerki-dynagrip-160.jpg)
be very carefull!
RE: STRIPES STUCK -
Dirty - 24-04-08
Ive used a long metal pick with a 90* bend at the end and some long needle nose pliers to yank out stuck inserts. You could also try some long and flat tweezers too...
RE: STRIPES STUCK -
Phikz - 24-04-08
Ty but ermm, they are stuck right down like i cant get to them with anything =S
RE: STRIPES STUCK -
sin`pl - 24-04-08
one more tip - if u use pliers, catch the stripe under 'eyelet'..
RE: STRIPES STUCK -
Phikz - 24-04-08
hmm i have tried tweezers and they just dont reach =[
Dont know what u mean by a metal pick?
Ahh they should have made the stripes less prone to break or something :@
RE: STRIPES STUCK -
pokey27 - 24-04-08
try a straightened paperclip but wrap it in celotape so the sticky bit is on the outside !!
RE: STRIPES STUCK -
Dirty - 24-04-08
A pick is like a small screw driver that comes to a point at the end. The ones I got have different angle bends at the pointy end. Id take a pic but i was on my way out the door!
RE: STRIPES STUCK -
Dirty - 24-04-08
http://buy1.snapon.com/catalog/item_Lg.asp?picFile=/47500/47464.JPG
PICKS^^^
RE: STRIPES STUCK -
Phikz - 24-04-08
I seee =]
Thanks