19-09-06, 05:14 PM
It's not a good photo but the first one is back from the casters.
I've mostly finished cleaning it up but it still needs a bit of work.
I'm intending to solder it onto a piece of silver about 1.5 cm high and around 5 cms wide with large holes near the ends so that laces can be fed through.
If you've got any ideas at this stage give me a heads up and I'll see if it's doable.
I've mostly finished cleaning it up but it still needs a bit of work.
I'm intending to solder it onto a piece of silver about 1.5 cm high and around 5 cms wide with large holes near the ends so that laces can be fed through.
If you've got any ideas at this stage give me a heads up and I'll see if it's doable.

