[mr.pure]

The story so far, on the arm at least.



It ain't perfect and will unfortunately have to be spoiled a little so it can be copied and cast.
No point in adding too much detail as it won't print.
The head on the screw for example is only 0.2 mm across and the printer can't go below 0.1 mm so adding the grippy bits on the dials and such is pointless.
Interesting exercise though.

how big are you making these P?

should look nuts!

It's gonna be about 3 1/2 inches wide.

i figure its being made to scale... what program u using? u making all the little parts seperate and assembling it all together? or making it all in the one file? like are the little bolts in the stock seperate that can come in or out or just made to look like bolts? looks awesome as though

I've made it in one file apart from the turntable but the finished piece will be in four pieces to help with polishing.
The arm, the turntable, the front and the back.
It will polished and or set with stones and then laser welded together so the turntable still spins.
I'm using 3Design.

Is the only difference between a 1200 and a 1210 the colour ?
I everything else in the same place ?